IKOpro Refresh Asphalt 20kg

0.0

Refresh Asphalt is an asphalt coating that restores and coats worn and cracked asphalt surfaces, as well as preventing asphalt from becoming brittle and shedding stones. Coating asphalt also protects and levels asphalt surfaces in areas where the asphalt is cracked and uneven. The coating evens out and fills in small cracks and prevents freezing and moisture damage. Refresh Asphalt coating gives an old asphalt surface years of additional life and a nearly new appearance. Package size is 20 kg.

Tnot inc. VAT.

117,00 €169,00 €

Amount

Product code: ikoasp20

Refresh Asphalt – surfacing asphalt repairs and coats worn and cracked asphalt surfaces, and also prevents asphalt from becoming brittle and losing stone material. The asphalt coating also protects and evens out the surface in areas where the asphalt is cracked and uneven. The coating evens out and fills small cracks and prevents damage from freezing and moisture.
Refresh Asphalt – surfacing asphalt gives old asphalt surfaces years of additional life and a nearly new appearance. Package size 20 kg.

Intended use:

Refresh Asphalt repairs and renovates worn and cracked asphalt surfaces and also prevents asphalt from becoming brittle and losing stone material. The asphalt coating also protects and evens out the surface in areas where the asphalt is cracked and uneven. The surfacing asphalt evens out and fills small cracks and prevents damage from freezing and moisture.

Features:

Non-slip and flexible surface
Extremely good temperature resistance
Does not contain solvents

Special features:

Color: black
Density: +/- 1.2
Viscosity at 20°C +/- 7,000 cps
Drying time at 20°C RH 50-60%
Tack-free time +/- 8 hours
Dry time +/- 24 hours
Product concentration by weight when dry +/- 55%

Instructions for use:

The surface to be coated must be free of loose dirt, grease, and oil. Do not use the product on a surface treated with tar or coal. Repair any holes and cracks with Tinascoat or Compound filler before applying Refresh Asphalt. Wait at least three weeks after repairing with Tinascoat or Compound-S 40 before applying Refresh Asphalt.
Stir Refresh Asphalt before use.
Apply the product to the surface with a rubber blade or soft brush.
When installing on new asphalt, apply Refresh Asphalt to a warm surface.
The surface temperature should be 10-30°C during installation.
The ideal temperature for installation is 15-20°C.
Consumption: +/- 1 kg/m2 – maximum 1.5 kg/m2.
Clean tools immediately with water.
Store for 6 months protected from freezing in an airtight package.
Pack size 20 ltr/20 kg.