HARVIA XENIO CX110C COMBI

Harvia Xenio Combi is a control panel with a touch-sensitive panel for a combined electric heater with a power of up to 11 kW. Suitable for Combi heater (combination of heater and steamer), standard electric heater and separate steamer. In addition to the heater, you can also control the lighting and ventilation of the sauna. The set includes a control center, a power supply unit, a temperature sensor with a 4 m cable and a 5 m data cable.
Harvia Xenio is a control panel with a touch panel for an electric heater with a power of up to 17 kW. In addition to the heater, you can also control the lighting and ventilation of the sauna. If the control panel is equipped with an additional power supply unit LTY17C, it can control heaters with a power of up to 28 kW.
The stylishly small but convenient panel can be easily installed in the sauna or laundry room, the front room or the living room. The panel can be installed both on the wall and recessed. The power supply unit is installed in a dry place outside the sauna room.
The temperature sensor is equipped with overheating protection and an NTC thermistor (22 kΩ/T=25 °C).

• Operating temperature range: 40-110 °C, accuracy 1 °C
• Humidity adjustment range: 20-80 rH
• Adjustable duration: 1-6 h in a home sauna, 1-12 h in a shared sauna
• Adjustable switch-on delay time: 0-12 h
• Display of selected and actual temperature
• Display of selected and remaining working time
• Display of selected and remaining switch-on delay time
• Self-check and fault signal
• Supply voltage: 400 V 3N~

Manual